XxwonderbredxX Posted December 11, 2013 Share Posted December 11, 2013 Hey guys! I want to add more case fans in my case. I have two fans in right now that came with the case. I don't know how to add more fans, like what do I have to do? I don't know anything about adding fans to cases.. Here's my case: http://www.aerocool.us/strikex/strikex_gt_black.html Here's my MOBO: http://www.asrock.com/mb/Intel/Z77%20Extreme4/?cat=Specifications Here's the four fans I want to add. Two of each.. http://www.xoxide.com/coolermaster-r4-120mmfan-green.html http://www.xoxide.com/enermax-tbsilence-120mmledfan-blue.html Thanks. 1 Quote Link to comment Share on other sites More sharing options...
BranHorse Posted December 11, 2013 Share Posted December 11, 2013 Hey guys! I want to add more case fans in my case. I have two fans in right now that came with the case. I don't know how to add more fans, like what do I have to do? I don't know anything about adding fans to cases.. Here's my case: http://www.aerocool....x_gt_black.html Here's my MOBO: http://www.asrock.co...=Specifications Here's the four fans I want to add. Two of each.. http://www.xoxide.co...mfan-green.html http://www.xoxide.co...edfan-blue.html Thanks. R4s are louder then they are rated as are sickle flows. But they are case fans so just controll them. All the need to do if move air. http://www.frozencpu.com/products/14438/fan-928/BitFenix_Spectre_Pro_120mm_Fan_-_Red_LED_BFF-LPRO-12025R-RP.html Have these in blue as rad fans. Pretty quiet and look nice. I run them at about 1/2 speed. Gran the 140 mm for your 140 slots. Stick with one color too. Unless its like white led and some other color it will look weird or messy. Most colors put together make a brown haha Quote Link to comment Share on other sites More sharing options...
XxwonderbredxX Posted December 11, 2013 Author Share Posted December 11, 2013 R4s are louder then they are rated as are sickle flows. But they are case fans so just controll them. All the need to do if move air. http://www.frozencpu...-12025R-RP.html Have these in blue as rad fans. Pretty quiet and look nice. I run them at about 1/2 speed. Gran the 140 mm for your 140 slots. Stick with one color too. Unless its like white led and some other color it will look weird or messy. Most colors put together make a brown haha okay, no R4's. And one color? :'( I'll keep it all red then. Since I want four fans, what kind of spiliters do I need? Because my MOBO has "3 x Chassis Fan connectors (1 x 4-pin, 2 x 3-pin)" fAnd I'm sure that I used the 2 3-pin connectors. So is there like a controller or something that I can plug all the fans into using one connector slot.. Or something like this... http://www.frozencpu.com/cat/l3/g34/c17/s424/list/p1/Bay_Devices-Fan_Controllers-Multi_Fan_Ports-Page1.html 1 Quote Link to comment Share on other sites More sharing options...
BranHorse Posted December 11, 2013 Share Posted December 11, 2013 okay, no R4's. And one color? :'( I'll keep it all red then. Since I want four fans, what kind of spiliters do I need? Because my MOBO has "3 x Chassis Fan connectors (1 x 4-pin, 2 x 3-pin)" fAnd I'm sure that I used the 2 3-pin connectors. So is there like a controller or something that I can plug all the fans into using one connector slot.. Or something like this... http://www.frozencpu...orts-Page1.html You can use that which is great if the fans were low noise/speed at 12v (or whatever the connector is running at) but if that is say full speed for the fan then it will be loud. I would either get a 3 pin splitter (2 3pin to 3pin then to motherboard header) or a controller. http://www.frozencpu.com/products/12481/bus-247/Sunbeam_30W_Rheosmart_6_Channel_Smart_Fan_Controller_-_Black_PL-RS-6.html?tl=g47c17 The one I got, but there are plenty others. Quote Link to comment Share on other sites More sharing options...
BranHorse Posted December 11, 2013 Share Posted December 11, 2013 okay, no R4's. And one color? :'( I'll keep it all red then. Since I want four fans, what kind of spiliters do I need? Because my MOBO has "3 x Chassis Fan connectors (1 x 4-pin, 2 x 3-pin)" fAnd I'm sure that I used the 2 3-pin connectors. So is there like a controller or something that I can plug all the fans into using one connector slot.. Or something like this... http://www.frozencpu...orts-Page1.html Also the 3 pin fans can connect to the 4 pin headers on your mobo. The 4th fan pin is just for pwm control which is what the board uses to control fans, but speed fan can control 3 pins just fine. Quote Link to comment Share on other sites More sharing options...
XxwonderbredxX Posted December 11, 2013 Author Share Posted December 11, 2013 You can use that which is great if the fans were low noise/speed at 12v (or whatever the connector is running at) but if that is say full speed for the fan then it will be loud. I would either get a 3 pin splitter (2 3pin to 3pin then to motherboard header) or a controller. http://www.frozencpu....html?tl=g47c17 The one I got, but there are plenty others. Okay! COOL BEANS! This answers everything I wanted know! Thanks again. You always got mah back with this computer sheeettt 1 Quote Link to comment Share on other sites More sharing options...
XxwonderbredxX Posted December 29, 2013 Author Share Posted December 29, 2013 Well heres my final list. Will all this work together? And is there anything else I should buy for all this stuff? Controller: http://www.amazon.com/Sunbeamtech-PL-RS-6-Rheosmart-Fan-Controller/dp/B004LKZESI Blue Fan: http://www.frozencpu.com/products/12872/fan-845/BitFenix_Spectre_LED_120mm_Fan_-_Blue_BFF-BLF-12025B-RP.html Green Fan: http://www.frozencpu.com/products/12869/fan-841/BitFenix_Spectre_LED_120mm_Fan_-_Green_BFF-BLF-12025G-RP.html Yes, imma see if colors will mix well. lol Let me know what you think. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.